Silicone mold Christmas Spider + Mold Casing

The silicone mold is suitable for making candles, as well as decorative items from plaster and concrete.

The detachable 3D mold consists of two silicone mold halves and two plastic casing halves, which securely hold the mold in place during pouring. This construction ensures accurate geometry, ease of use, and a perfectly smooth surface on the finished product.

The set includes:

• 2 silicone mold halves
• 2 plastic casing halves

The mold is assembled and secured with rubber bands and fasteners.

Temperature resistance: from −40 °C to +200 °C.

The color or shade of the silicone mold may vary. This does not affect the quality of the finished product.

Customers also order the Set of 11 dyes, 2 g each with this silicone mold.

Finished product dimensions:

Width – 75 mm;
Length – 90 mm;
Height – 158 mm;
Candle weight – 200 g.

Use and care

Before pouring, preheat the mold with a hairdryer to avoid a sudden temperature difference. Thoroughly lubricate it with silicone spray to make removing the finished product easier and to help maintain the mold.

When pouring, avoid tightening the rubber bands too much, as this may deform the mold and the finished candle.

After each use, wash the mold thoroughly in warm water with detergent. Allow it to dry completely and store it in a dry place away from direct sunlight.

The first test pour must be performed without puncturing the mold to assess the finished product.

Read more about our exchange and return policy.