Electronic thermometer with a stainless steel saber with a temperature range from -50 to +300 & deg; c.
Due to the fact that the sensor can be dipped in a liquid or inserted into any other surface, the thermometer is perfectly applicable for measuring the temperature & nbsp; wax mixture.
Comments on use
-
Put the probe in the measured environment by at least 1 cm;
-
& nbsp; if the thermometer is not used for a long time, then remove the battery from the battery compartment;
-
& nbsp; the thermometer cannot be placed in oven cabinets, microwave and other furnaces;
-
clean with a damp cloth, you can with a small amount of detergent.
The battery is included! + case.
& nbsp;
Features:
-
The sensor probe is made of stainless steel;
-
The sensor body is made of strong plastic;
-
A wide temperature range of measurement: from -50 & deg; C to +300 & deg; C (-58 & deg; F up to +572 & deg; f);
-
Switching between the units of measurement: & deg; C and & deg; f;
-
Automatic shutdown after 10 minutes of inaction;
-
HOLD button - fixation of measurement values;
-
Temperature specification: 0.1 & deg; c (& deg; f);
-
error -+1 & deg; c;
-
Memory for the last dimensions;
-
can be used continuously within 200 hours;
-
response time 5 seconds;
-
power: 1 battery AG13 or LR44 by 1.5 V;
-
size: 22.5 cm x 2 cm x 2 cm;
-
The length of the probe-igla 14.6 cm;
-
The diameter of the probe is 2.25 mm.
Description of the functions of buttons:
-
button on/off: the function of turning on/off;
-
The & Deg; C/& Deg; F: when the LCD display displays the temperature, click this button to select a unit of measurement & deg; C or & deg; f;
-
The Hold button: When the LCD display displays the temperature, press this button to maintain the displayed value in the retention state. Click the button again to return to the temperature measurement. When using the function of holding on the display, the symbol of Hold or H;
is displayed -
Max | Min: when you first press the button, the maximum temperature reached during measurement and symbol X will be displayed. When you repeatedly press the display, the minimum temperature reached during measurement and symbol N. Click on the button again to make it again to make it possible to Return to temperature measurement.
