Silicone mold Cylinder Paz

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

Complete set – Paz cylinder+cap.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs.

Two versions of the lid can be purchased in the kit for the mold – 0.9 mm (Lid 1.0) and 1.6 mm (Lid 2.0).

Dimensions of the finished product:

Diameter – 80 mm;

Height – 70 mm;

The volume of the solution is 180 ml;

The volume of wax is 155 ml.
 

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.