Silicone mold Cylinder - M+ with formwork

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold and formwork may vary. It will not affect the quality of the finished product.

Molds from this collection are Cylinder - XL, Cylinder - M, Cylinder - L, Cylinder - S.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs.
Two versions of the cover can be purchased in the kit for the form - 0.9 mm (cover 1.0) and 16 mm (cover 2.0).
Under the Cylinder - M+, silicone molds are also often taken, the Oval 2M and Oval 3M stand.

Formwork is included with the form.
Inside the mold there is a drainage hole for excess water to drain.
If you need a form without it, for example, for a candle, then be sure to write us about it in the comments of the order.
Or, after receiving, you can cut off the "tipstick" yourself.

Dimensions of the finished product:

Height – 100 mm;

Diameter – 80 mm;

The diameter of the hole is 63 mm;

The depth of the hole is 84.5 mm;

Wall thickness – 8 mm;

The volume of the solution is 251 ml;

The volume of wax is g.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.