Silicone container form for plaster xs

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

The molds in this collection are L Gypsum Container, S Gypsum Container.

Dimensions of the finished product:

The lower diameter is 38 mm;

The upper diameter is 48 mm;

Height – 50 mm;

The full volume of the container is 70 ml.

For convenient work with the form, it is recommended to cast half of this volume.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.