Silicone mold Candlestick "Sacra Lignum" + formwork

The silicone mold is suitable for concrete and plaster products.
The mold has one author's cut, it can be uneven or straight. This is the norm, depending on the complexity of the mold, and is not considered a defect (defect). Its presence is a technical necessity for easy removal of the product.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

Molds from this collection – Candlesticks.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs​​​​​​.

Dimensions of the finished product:

Height – 135 mm;

Outer Diameter – 70 mm;

Hole Diameter – 20 mm;

Hole Depth – 20 mm;

Solution Volume – 322 ml.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.