Kurch's silicone form

The silicone mold is suitable for soaps and candles.
The mold can also be used for pouring plaster/concrete, to create decorative products.

The form has two author's cuts, they can be uneven or straight. This is the norm, depending on the complexity of the mold, and is not considered a defect. Their presence is a technical necessity for easy removal of the product.
If you need a form without cuts, be sure to write us about it in the comments of the order.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

Molds for candles – for Easter.
For the silicone mold, order – Olive wax EcoOlive PillarBlend;

Dimensions of the finished product:

Length – 50 mm;

Width – 50 mm;

Height – 76 mm;

The weight of the candle is 81 g.
 

Use and Care:
Preheat the mold with a hair dryer to avoid temperature dissonance, and coat it well with Silicone Spray for easy product removal and mold maintenance. During pouring, we advise you not to drag the mold with rubber bands to avoid direct deformation of the mold and the candle.
After each pouring, wash the mold well using a detergent in warm water, wait for complete drying and store the mold in a dry place, without direct sunlight.

Be sure to test the first filling of the mold without a puncture, to evaluate the finished product.
Learn more about exchanges and returns.