Kite silicone mold

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

Molds from this collection are Okto, Kite 0.5, Geom.
In addition to the mold, a Circle - L16 or Hexagon L16 stand can be ordered.

Inside the mold there is a drainage hole for excess water to drain.
If you need a form without it, for example, for a candle, then be sure to write us about it in the comments of the order.
Or, after receiving, you can cut off the "tipstick" yourself.

Dimensions of the finished product:

Height – 67 mm;

Diameter – 136 mm;

The diameter of the hole is 89-101 mm;

The depth of the hole is 51 mm;

Wall thickness – 6-24 mm;

The volume of the mixture is 348 ml;

The volume of wax is.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.