Silicone form of Pot Hemisphere

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

More about Gypsum planter problems and their solutions.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs.

Inside the mold there is a drainage hole for excess water to drain.
If you need a form without it, for example, for a candle, then be sure to write us about it in the comments of the order.
Or, after receiving, you can cut off the "tipstick" yourself.

Dimensions of the finished product:

The lower diameter is 50 mm;

Upper diameter – 130 mm;

Height – 60 mm;

The volume of the solution is 225 ml.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.