Mold Moon Phase Planter + formwork

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold and formwork may vary. It will not affect the quality of the finished product.
The formwork comes complete with the mold.

The molds in this collection are Elly 2.0 + lid.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs.

Dimensions of the finished product:

Height – 70 mm;

Length – 175 mm;

Width – 98 mm;

The length of the opening is 160 mm;

The width of the opening is 75 mm;

The depth of the hole is 50 mm;

Wall thickness – 10 mm;

Volume of wax – 275 g;

The volume of the mixture is 428 g.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.