Silicone mold Cylinder - L

The silicone mold is suitable for concrete and plaster products.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.

Molds from this collection are Cylinder - XL, Cylinder - M+, Cylinder - M, Cylinder - S.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs, Circle - S12.

Formwork is included with the form.
Inside the mold there is a drainage hole for excess water to drain.
If you need a form without it, for example, for a candle, then be sure to write us about it in the comments of the order.
Or, after receiving, you can cut off the "tipstick" yourself.

Dimensions of the finished product:

Height – 100 mm;

Diameter – 100 mm;

Hole diameter – 77 mm;

Hole depth – 86 mm;

Wall thickness – 10-13 mm;

Volume of the solution – 404 ml;

Volume of wax – g.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.