|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
The silicone mold is suitable for candles.
The mold can also be used for pouring plaster/concrete, to create decorative products.
All table candles can be combined with each other in a group of 3 pcs. For more detailed information, write to us.
The kit includes a formwork with fasteners.
The shape has three original cuts, they can be uneven or straight. This is the norm, depending on the complexity of the mold, and is not considered a defect. Their presence is a technical necessity for easy removal of the product.
If you need a form without cuts, be sure to write us about it in the comments of the order.
Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold and formwork may vary. It will not affect the quality of the finished product.
Molds from this collection – Three table cylinders are smooth, Three cylinders table "Kyivshchyna".
For the silicone mold, order – Soy wax KeraSoy Pillar 4120 and "Jar" candle holder (with hole), "Jar" candle holder low (with hole).
Dimensions of the finished product:
Height – 245 mm;
Diameter – 24 mm;
Diameter with snake - 26 mm;
The lower diameter is 20 mm;
Candle weight – 85 g.
Use and Care:
Preheat the mold with a hair dryer to avoid temperature dissonance, and coat it well with Silicone Spray for easy product removal and mold maintenance. During pouring, we advise you not to drag the mold with rubber bands to avoid direct deformation of the mold and the candle.
After each pouring, wash the mold well using a detergent in warm water, wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold without a puncture, to evaluate the finished product.
Learn more about exchanges and returns.