Silicone mold Cube - XL + formwork

The silicone mold is suitable for concrete and plaster products.
Formwork is included in the kit.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold and formwork may vary. It will not affect the quality of the finished product.

Molds from this collection – Cube - XL stand, Cube Paz + lid​​​​​​.
In addition to the mold, Nature Wax C3 soy wax is ordered.

Inside the mold there is a drainage hole for excess water to drain.
If you need a form without it, for example, for a candle, then be sure to write us about it in the comments of the order.
Or, after receiving, you can cut off the "tipstick" yourself.

Dimensions of the finished product:

Length – 120 mm;

Width – 120 mm;

Height – 120 mm;

The length of the hole is 99 mm;

The width of the opening is 99 mm;

The depth of the hole is 110 mm;

Wall thickness – 10.5 mm;

The volume of the solution is 900 ml.

Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.