|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
The silicone mold is suitable for concrete and plaster products.
Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.
More about How to make a plaster planter?
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs.
Inside the mold there is a drainage hole for excess water to drain.
If you need a form without it, for example, for a candle, then be sure to write us about it in the comments of the order.
Or, after receiving, you can cut off the "tipstick" yourself.
Dimensions of the finished product:
Lower diameter – 50 mm;
Upper diameter – 130 mm;
Height – 60 mm;
The volume of the solution is 225 ml;
The volume of wax is 235 g.
Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.