Silicone mold Mushroom Wrinkled - Set

The silicone mold is suitable for soaps and candles.
The mold can also be used for pouring plaster/concrete, to create decorative products.
 

The form has one author's cut, it can be uneven or straight. This is the norm, depending on the complexity of the mold, and is not considered a defect. Its presence is a technical necessity for easy removal of the product.
If you need a form without cuts, be sure to write us about it in the comments of the order.

Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold may vary. It will not affect the quality of the finished product.
 

The molds from this collection are Wrinkled Mushroom S, Wrinkled Mushroom M.​​​​​​
For easy work with the wick, order – Needle 10 cm;

Dimensions of the finished product:
Mushroom Wrinkled S​​​:​​​​​​

Height – 85 mm;

Upper diameter – 38 mm;

The lower diameter is 28 mm;

The weight of the candle is 44 g.

Wrinkled M mushroom:

Height – 112 mm;

The upper diameter is 48 mm;

The lower diameter is 35 mm;

The weight of the candle is 83 g.

Use and Care:
Preheat the mold with a hair dryer to avoid temperature dissonance, and coat it well with Silicone Spray for easy product removal and mold maintenance. During pouring, we advise you not to drag the mold with rubber bands to avoid direct deformation of the mold and the candle.
After each pouring, wash the mold well using a detergent in warm water, wait for complete drying and store the mold in a dry place, without direct sunlight.
 

Be sure to test the first filling of the mold without a puncture, to evaluate the finished product.
Learn more about exchanges and returns.