|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
The silicone mold is suitable for concrete and plaster products.
Temperature resistance from -40°С to +200°С.
The color or shade of the silicone mold and formwork may vary. It will not affect the quality of the finished product.
Kit includes Elly 2.0 mold and lid and formwork.
More about Gypsum planter problems and their solutions.
In addition to the mold, you can order – Gypsum container L, Gypsum container S, Gypsum container xs.
Dimensions of the finished product of the cover:
Height – 10 mm;
Length – 160 mm;
Width – 80 mm;
The protrusion of the bottom is 5 mm.
Dimensions of the finished product Elly 2.0:
Height – 50 mm;
Length – 160 mm;
Width – 80 mm;
The length of the hole is 144 mm;
The width of the opening is 64 mm;
The depth of the hole is 38 mm;
Wall thickness – 8 mm;
Volume of wax – 220-240 ml;
The volume of the mixture is ml.
Use and Care:
During pouring, we advise you not to press the mold to avoid direct deformation of the mold and the product.
After each pour, wash the mold well using a detergent with oil or silicone spray in warm water, the lubricant washes away bright pigments well. Wait for complete drying and store the mold in a dry place, without direct sunlight.
Be sure to test the first filling of the mold to evaluate the finished product.
Learn more about exchanges and returns.